This product is not recommended for new designs, but still good for evaluation and education purpose. 

The AP1 module is a drop-in and FCC-test-ready transceiver module that uses an nRF24AP1 chip. An F antenna is integrated on the small-sized 20mm by 20mm board. Able to support 4 ANT channels, the module is ideal to build control or hub nodes of a wireless sensor network.

Features

• 2.4GHz ISM band
• 20mm x 20mm
• Ultra-low-power operation
• Simple sync/async serial interface
• Integrated F antenna
• Up to 4 ANT channels
• Broadcast, acknowledged, or burst data transmissions
• 8 byte data payload per message
• Minimum message rate per ANT channel 0.5Hz
• ANT channel combined message rate up to  200Hz
• Burst transfer rate up to 20Kbps (true data throughput)
• Up to 3 ANT public, managed and/or private networks
• 1 Mbps RF data rate
• 125 selectable RF channels
• 1.9V to 3.6V supply voltage range
• -40°C to +85°C operating temperature
• FCC test ready
• Pin compatible with newer ANT C7, AP2 and AT3 modules
• RoHS compliant

Documents and Resources

ANTAP1MxIB Datasheet
ANT Message Protocol and Usage
Interfacing with ANT General Purpose Chipsets and Modules
Power Consumption Estimator

Ordering Information

Please "Source Now" through our distributors.