ANT Development Interface Board
All of the interface boards in ANT development kit are available individually to developers as needed to create their own complex demontrations
USB Interface Board 
A Molex connector on board allows a "M5" module, e.g. ANT11TS33M5IB or ANTAP281M5IB, to be plugged on. With this USB stack connected, a PC turns into an ANT development platform talking to the module through the USB serial port. Also on the board are ten pins with a number of GPIO and analog inputs from the module to link to peripheral devices, such as sensors.
Battery and Interface Board Stack 
The ANTBAT1 battery and interface board stack provides a fast track to build ANT network node prototypes and sensor network demonstrations.
Both boards have Molex connectors so that an ANT "M5" module, e.g. ANT11TS33M5IB or ANTAP281M5IB, can be plugged on directly. The battery board has a slot for a 2032 coin cell, switches to select the operation mode of the module, and 20 pins of GPIO and analog inputs for connecting to peripheral devices, all necessary to build a wireless sensor/hub node. The interface board offers four LED and four input buttons.
Ordering Information