**** DESCRIPTION
The network processor firmware included in this package is intended for use
with the ANT s310 v1.0 SoftDevice.

*** IMPORTANT ***
When programming the ANT Network Processor application, the I/O board must not 
be connected to the module and battery board. The ANT SoC module should be stacked 
directly on top of the battery board. The ANT Network Processor application 
includes bootloader activation support via a BOOT pin. Connecting the I/O board to 
a module that is programmed with the ANT Network Processor application will result 
in activation of the bootloader, and a 2 minute timeout will be required before 
being able to run the network processor application. 
For more details on the BOOT pin, refer to the N5 module datasheet.