Field Detail

• MSG_CMD_GEOCACHE_REQUESTDEVICEPROGRAMMING_PARAM_bundlePROGRAMMINGDATA

  public static final java.lang.String MSG_CMD_GEOCACHE_REQUESTDEVICEPROGRAMMING_PARAM_bundlePROGRAMMINGDATA

  A bundle containing the (1 to many) data fields desired to be programmed to the device. Sent in the #MSG_CMD_GEOCACHE_whatREQUESTDEVICEPROGRAMMING command.

  See Also:

  Constant Field Values

• intDEVICEID

  public static final java.lang.String intDEVICEID

  Device ID of the geocache device.

  See Also:

  Constant Field Values

• stringIDENTIFICATIONSTRING

  public static final java.lang.String stringIDENTIFICATIONSTRING

  Identification string of a geocache device. Note: This string is also received in the DeviceList information handled by AntPlusGeocachePcc.IAvailableDeviceListReceiver. Supports ASCII characters from 0x20 to 0x5F. IDs must be 9 characters long. If an ID is composed only of spaces (" "), it signifies it is in the unprogrammed state.

  See Also:

  Constant Field Values

• longPIN

  public static final java.lang.String longPIN

  The programming PIN to protect against accidental reprogramming. The Geocache profile documentation states it is the responsibility of the receiver to not reprogram devices on which that receiver did not originally program and set the PIN. Range: 0 to 0xFFFFFFFE (If a PIN value equals 0xFFFFFFFF it signifies it is in the unprogrammed state).

  See Also:

  Constant Field Values

• decimalLATITUDE

  public static final java.lang.String decimalLATITUDE

  The "next stage" latitude coordinate. Units: degrees, -90 (90S) to 90 (90N). Hint: Use 'serializable' for bundle put/get. ie: "BigDecimal latitude = (BigDecimal)b.getSerializable(GeocacheDataKeys.decimalLATITUDE)"

  See Also:

  Constant Field Values

• decimalLONGITUDE

  public static final java.lang.String decimalLONGITUDE

  The "next stage" longitude coordinate. | degrees, -180 (180W) to 180 (180E). Hint: Use 'serializable' for bundle put/get. ie: "BigDecimal longitude = (BigDecimal)b.getSerializable(GeocacheDataKeys.decimalLONGITUDE)"

  See Also:

  Constant Field Values

• stringHINTSTRING

  public static final java.lang.String stringHINTSTRING

  The "hint" message string stored on the device. Note: The maximum length of this string depends on how much other data is saved on the device.

  See Also:

  Constant Field Values

• gregorianCalendarLASTVISITTIMESTAMP

  public static final java.lang.String gregorianCalendarLASTVISITTIMESTAMP

  Timestamp of the last visit. Note for receivers: The plugin takes care of updating this field automatically whenever any application requests to read the data (and the field is auto-updated only once during the entire duration the device can be detected in range regardless of how many downloads requests occur). Format: UTC time using the Gregorian Calendar. Hint: Use 'serializable' for bundle put/get. ie: "GregorianCalendar lastVisitTimestamp = (GregorianCalendar)b.getSerializable(GeocacheDataKeys.gregorianCalendarLASTVISITTIMESTAMP)"

  See Also:

  Constant Field Values

• intNUMBEROFVISITS

  public static final java.lang.String intNUMBEROFVISITS

  The number of visits logged on the device. Note for receivers: The plugin takes care of updating this field automatically whenever any application requests to read the data (and the field is auto-updated only once during the entire duration the device can be detected in range regardless of how many downloads requests occur). Range: 0-65535.

  See Also:

  Constant Field Values

• intHARDWAREREVISION

  public static final java.lang.String intHARDWAREREVISION

  Manufacturer defined.

  See Also:

  Constant Field Values

• intMANUFACTURERID

  public static final java.lang.String intMANUFACTURERID

  ANT+ Alliance managed manufacturer identifier.

  See Also:

  Constant Field Values

• intMODELNUMBER

  public static final java.lang.String intMODELNUMBER

  Manufacturer defined.

  See Also:

  Constant Field Values

• intSOFTWAREREVISION

  public static final java.lang.String intSOFTWAREREVISION

  Manufacturer defined.

  See Also:

  Constant Field Values

• longSERIALNUMBER

  public static final java.lang.String longSERIALNUMBER

  Serial number of the device.

  See Also:

  Constant Field Values

• longCUMULATIVEOPERATINGTIME

  public static final java.lang.String longCUMULATIVEOPERATINGTIME

  The cumulative operating time since the battery was inserted. Units: seconds (with 2 or 16 resolution[indicated by the cumulativeOperatingTimeResolutionFlag]). Rollover: At ~1.1yrs (at 2s resolution) or ~8.5yrs (at 16s resolution).

  See Also:

  Constant Field Values

• decimalBATTERYVOLTAGE

  public static final java.lang.String decimalBATTERYVOLTAGE

  Current battery voltage. Units: Volts (with 1/256V resolution). Hint: Use 'serializable' for bundle put/get. ie: "BigDecimal batteryVoltage = (BigDecimal)b.getSerializable(GeocacheDataKeys.decimalBATTERYVOLTAGE)"

  See Also:

  Constant Field Values

• intBATTERYSTATUSCODE

  public static final java.lang.String intBATTERYSTATUSCODE

  The current reported BatteryStatus.

  See Also:

  Constant Field Values

• intCUMULATIVEOPERATINGTIMERESOLUTION

  public static final java.lang.String intCUMULATIVEOPERATINGTIMERESOLUTION

  The resolution accuracy of the cumulativeOperatingTime. Units: seconds.

  See Also:

  Constant Field Values

Constructor Detail

• LegacyGeocacheCompat.GeocacheDeviceDataCompat_v1.IpcDefinesCompat_v1

  public LegacyGeocacheCompat.GeocacheDeviceDataCompat_v1.IpcDefinesCompat_v1()