IMPORTANT! - Critical Update to ANT-FS Reference Design
Welcome Guest,Register Now
Log In

Tech Bulletin

  • May 28, 2013

    IMPORTANT! - Critical Update to ANT-FS Reference Design

    We have recently updated the ANT-FS Embedded Client Reference Design to address an incorrect definition for the default transmit power value. Previously this value was set to -20dBm even though the associated comment indicated that it was 0dBm. This could have resulted in poor RF performance and shorter than expected transmission distance between the ANT-FS Client and Host. The default transmit power has since been updated to 0dBm.

    If you have been using this reference design as a basis for an ANT-FS Client, please review the changes and verify that your application implements the proper behaviour.  For any questions or concerns regarding this issue please contact [email protected].

    < Back to all bulletins