ANT Forum

https://www.thisisant.com/forum/view/ ANT Forum en Copyright 2025 2025-08-22T17:29:10+00:00 https://www.thisisant.com/forum/view/viewthread/9448/ https://www.thisisant.com/forum/view/viewthread/9448/#When:17:29:10Z Is there anyway to simulate Environmental factors like Temperature (like the data you would get from a TEMPE)?<br /> <br /> I've tried a few versions of Simulant and didn't see an option, but wanted to see if I was missing it. 2025-08-22T17:29:10+00:00 https://www.thisisant.com/forum/view/viewthread/7675/ https://www.thisisant.com/forum/view/viewthread/7675/#When:09:27:10Z Hi,<br /> I want to set the maximum resistance of my bike trainer via data page 54 (0x36) known as FE-Capabilities.<br /> To get familiar, I decided to use SimulANT tool, and set the maximum resistance by (bike trainer FE-C) device profile. (See attached picture).<br /> <br /> The problem I have is that setting different maximum resistance is not affecting the bike trainer.<br /> To test it, I set at first a 40% of maximum resistance via the basic resistance (data page 48 (0x30)), and then I changed the maximum resistance from 1 to 10000 and there is no feeling of change in the resistance.<br /> <br /> Do you have any idea how this work,<br /> Thanks for any guide,<br /> Meysam. 2023-07-25T09:27:10+00:00 https://www.thisisant.com/forum/view/viewthread/7656/ https://www.thisisant.com/forum/view/viewthread/7656/#When:17:11:38Z Hi,<br /> I'm testing my implementation handling geocaches. SimulANT fails to load the python script so I can test authentication. I get the following error -<br /> <strong>1777810968 : Traceback (most recent call last):<br /> File "C:\Program Files (x86)\ANT\SimulANT+2.11.0.Adopter\SimulANT+2.11.0.0.Adopter\SimulANT+\Scripts\GeocacheDevice\geo_DeviceAutoRespondToAuthRequest.py", line 23, in &lt;module&gt;<br /> ImportError: No module named hashlib<br /> </strong><br /> <br /> Also, the simulator receives my request but no response is transmitted.<br /> <br /> Any help appreciated. Best regards. 2023-05-02T17:11:38+00:00 https://www.thisisant.com/forum/view/viewthread/7633/ https://www.thisisant.com/forum/view/viewthread/7633/#When:08:31:59Z Hi,<br /> <br /> I feel quite blonde but I downloaded Simulant+ from:<br /> <a href="https://www.thisisant.com/resources/simulant-1/">https://www.thisisant.com/resources/simulant-1/</a><br /> <br /> Unzipped it and run Simulant+.exe, however it directly throws an error (see attached image). Which is a bit non-descriptive as it seems to access something I am not allowed to access. However, even running it as administrator does not resolve the issue.<br /> <br /> Is something broken in this version? <br /> <br /> Semi-unrelated question (not there to test it myself yet as the basics already do not function):<br /> Is it possible to just get a list of broadcasting ant+ signals (power meter, cadence, heart rate, etc.) or does it need to be looked up by type separately?<br /> <br /> Thanks! <br /> 2023-01-05T08:31:59+00:00 https://www.thisisant.com/forum/view/viewthread/7627/ https://www.thisisant.com/forum/view/viewthread/7627/#When:20:40:18Z Hello!<br /> Must be stupid because I can't find any info in the docs about how to add sensors. All I get is the screen attached with this post. <br /> There are only three buttons visible: Refresh, Turn On, Turn Off.<br /> <br /> Nothing happens when I click on any of them.<br /> <br /> 2022-12-01T20:40:18+00:00 https://www.thisisant.com/forum/view/viewthread/7621/ https://www.thisisant.com/forum/view/viewthread/7621/#When:08:51:05Z Hi,<br /> <br /> while running the MD_0003 (channel period - LEV Display to verify a LEV sensor) test SimulANT+ crashes. After entering the device ID it says "got device id - expected channel" and then just closes. All the other tests are running fine.<br /> Any ideas on how to fix this?<br /> <br /> have fun.<br /> <br /> Tobi 2022-11-07T08:51:05+00:00 https://www.thisisant.com/forum/view/viewthread/7538/ https://www.thisisant.com/forum/view/viewthread/7538/#When:15:19:22Z hi IM new here <br /> <br /> looking for some option to collect ANT data from LEV on Mac <br /> <br /> the best would be to save it for future usage for simulation on developing fields for Garmin edge530 <br /> <br /> Marek 2021-07-14T15:19:22+00:00 https://www.thisisant.com/forum/view/viewthread/7515/ https://www.thisisant.com/forum/view/viewthread/7515/#When:11:35:10Z <br /> Dear all,<br /> <br /> I put you in the situation, hoping that someone knows a similar case and can help me.<br /> <br /> I am developing a project where it is intended to transmit the sensor data of an electric bike (cadence, power and speed) using the ANT + protocol and then use indoor training simulators (for example Zwift).<br /> <br /> These sensors are connected by an ASI controller (Electric Motor Controllers | Accelerated Systems Inc.) and we know how to gather the necessary data through the controller. It is intended to use an Arduino board to create a message in the ANT + protocol and transmit it via bluetooth.<br /> <br /> At this point, I would like to ask you if you know of a similar case where someone intends to transmit data from bicycle sensors using the ANT + protocol. If you can help me, I would need to know what structure a complete ANT + message has. I have reviewed the profile of the sensors, but these are a bit complex to understand and I can't quite understand the array of bits that has to be transmitted and what each bit means. If anyone could help me understand this protocol structured by Data Pages, I would be forever grateful.<br /> <br /> I have SimulANT + and two USBs, with which I have tried to figure out how a message is structured, but to no avail.<br /> <br /> Thank you very much in advance, I hope someone has knowledge to help me a bit.<br /> <br /> Greetings,<br /> <br /> Aba<br /> 2021-05-04T11:35:10+00:00 https://www.thisisant.com/forum/view/viewthread/7397/ https://www.thisisant.com/forum/view/viewthread/7397/#When:23:29:45Z Where do I find SimWorkshop.dll and GeneralWPF.dll? 2020-08-11T23:29:45+00:00 https://www.thisisant.com/forum/view/viewthread/7311/ https://www.thisisant.com/forum/view/viewthread/7311/#When:20:12:42Z Hi <br /> <br /> Is it possible too Save cadence and poweroutput data from a training session and then use this data like a script too produce realistic ”random” power and cadence Numbers?<br /> <br /> If it does, how do i Save the data ? 2020-02-15T20:12:42+00:00