ANT Forum

Hello,

I'm trying to run the ANT+ Display sim, but am running into a lot of trouble. I'm using a usb stick and an AP2 radio (both from the devkit), which works fine with ANTWare II, but then when I try to connect through display sim I get an "ANT initialization failure" error. Here's what I've got and tried so far:

* Running WIndows 7, using an AP2 and USB stick from the devkit
* Checked that ANTware II isn't running at the same time
* Unplugged / replugged the radio into the PC
* removed then reinstalled drivers (USB1 driver for the AP2, correct?)
* Double checked the baud rate and port number (Device manager lists a port and hub number. Does the hub number matter?)


Any other suggestions?

Thanks!
Peter Gagnon
Intermec      

I thought the USB2 drivers were for the AP2 and USB1 was for the AP1 based sticks. I could be wrong. I only have an AP1 stick that came with my Garmin FR60. I don't think I needed any other drivers besides the one that came with the Garmin so I'm no help there.

If it's working in ANTware II then maybe it's worth trying on another system or reinstalling the simulator. I've generally found it pretty robust and these errors are usually something simple.

Keep us posted.

Keith Wakeham