ANT Forum

hello every one.

I using a phone with ant+ usb stick 2

before I want to receive some acknowledge message & broadcast message
I configure the channel on receive side(my phone)
I having reference the "Bike speed and cadence sensors"

device ID=0,
transmission type=0,
device type=123
Period=8118.
......

and I open channel after those steps
but it's display search timeout on DDMS
I don't know what happen there
do I lose something?

I'm the starter and I face some problem
maybe someone can help me .. thx      

Make sure you are assigning the channel to the ANT+ network. Also, double check your channel parameters match the type of sensor you have: bike speed/bike cadence or combined bike speed and cadence. If in doubt, check the product directory to confirm what kind of sensor you have.
http://www.thisisant.com/directory/

Is you sensor transmitting? You can verify the sensor is transmitting using the ANT+ display simulator to connect to it. You can also use the ANT+ sensor simulator (with a second USB stick) to simulate a e sensor to test your app.