ANT Forum

Hi,
What is the difference between ANTAP281M5IB and ANT11TS33M5IB module ?

The datasheet says ANT11TS33M5IB has a TI MCU inside it,so does it imply that I dont need to use additional Host Micro-Controller ?

And if yes, then how can i program that micro controller ?

Please help

Regards
Pavan      

Hi,

AT3 modules can be used directly without the need for an external MCU. That is because most AT3 modules have SensRcore feature which is an easy-to-use platform for designing wireless networks. This feature allows developers to load scripts into the AT3 module for configuring ANT channels and setting the device as a master or slave.

Check the product data sheet for your specific AT3 module to see whether or not the module supports SensRcore feature.

However, SensRcore is only suitable for simple wireless network applications. Therefore, whether or not you need an external MCU depends on the complexity of your application.

For more information on how to use SensRcore in an AT3 module, refer to the 'ANT Development Kit User Manual':
http://www.thisisant.com/pages/developer-zone/development-kit-manual

Also, refer to the 'ANT SensRcore Messaging and Usage' document regarding SensRcore and how to write the scripts:
http://www.thisisant.com/pages/developer-zone/ant-protocol-and-usage


The link below is a quick start-up guide on ANT development in embedded systems:
http://www.thisisant.com/component/option,com_fireboard/Itemid,146/func,view/catid,25/id,1391/