I am running a Trainer prototype with 3 Active ANT Profiles. Bicycle Speed and Cadence, Bike Power, and FE-C. I get the same results running the Master profiles on my Nordic module and on the Nordic Demo board. These are running with the Profile recommended timing, and I can see the occasional dropouts due to collision when I run all three simultaneous SimulANT display simulators, using a single Suunto ANT stick, on Windows 10. In addition to the colllision dropuots, I also see the display simulators lose sync repeatedly on the BPWR and FEC profiles. This occurs at times when there should be no channel collision. Attached is a timed log from the 3 SimulANT logs, showing the relative timing and dropouts. When I run Trainer Road, with all 3 profiles, I see the dropouts also. Is this a basic system issue trying to use a single ANT stick receiver, or shouild I be looking for a different failure cause?
