Welcome Guest,Register Now
Log In

ANT Forum

Welcome guest, please Login or Register


Doing the SD_0002 test on a display / controller


Total Posts: 1

Joined 2021-09-29


doing the SD_0002 test on a display / controller connected to the bike trainer simulator (FE-C), I have an error: “Transmission byte should not be wildcarded in normal operation mode”
In the FE-C profile pdf it says that a display / controller must search for devices with device number of 20 bits
Why is there an error?


Total Posts: 313

Joined 2012-06-27


This test result indicates that you are only setting the 16-bit device number and not the transmission type byte.

After pairing with the sensor you are to save the transmission type byte as well as the 2 byte device number and set both for subsequent connections to the sensor.      


Ian Haigh