Auto Light Mode on Garmin Edge 830

Username		Password		Remember Me?	forgot password?

04 November 2022 08:13 AM

Total Posts: 8

Joined 2022-06-21

Hello,

When in Individual network mode, and selecting Auto Mode for a specific light, we see the attached communication. (AutoModeEntrance.png)

First question is , why sending periodically the command 0x0E (Medium)?
Second is what is the 0xF3 meaning?

When trying to go in another mode, Off for example, we have the second attached communication: (AutoModeExit.png)

So it seems that when entering Individual Auto mode, it is impossible to exit it. Is it correct?
If not can the light can do something about it?

The only solution to exit it I found is to go to auto network mode and back to individual.

Kind regards,

Martin

Image Attachments

Click thumbnail to see full-size image

07 November 2022 11:56 AM #1

haighi Administrator

Total Posts: 370

Joined 2012-06-27

PM

You are entering individual network mode and auto light mode using method at https://www.thisisant.com/forum/viewthread/7610/?

Page 0xF3 is mfg specific. What mfg id is your light under test reporting in this case?

Signature

Ian Haigh

08 November 2022 12:34 AM #2

martinlemaireScott Newbie

Total Posts: 8

Joined 2022-06-21

PM

Hi,

The attachments were produced with SimulANT+ with Dynastream mfg id, which explain the page 0xF3

But for the other answer, this thread is not about switching from individual to auto network mode as the thread you propose me.
It is, in Individual network mode, to be able to switch from Auto light mode (mode #9) to any other mode.

Martin

ANT Forum