ANT Forum

0 Copyright (c) 2021 ExpressionEngine tag:https:,2021:05:20 tag:https:,2021:/www.thisisant.com/forum/viewthreadANT/viewthread/.7520 2021-05-20T21:45:07Z 0 Yoyo2014
http://www.franksworkshop.com.au/wordpress/2020/01/25/ant-weight-scale-mqtt-publisher/ ]]> tag:https:,2018:/www.thisisant.com/forum/viewthreadANT/viewthread/.7041 2018-07-24T09:34:11Z 2018-07-24T09:39:54Z yonjuukyuu I need to get data from a Tanita BC-1000 too a webapp, is there any documentation that someone can link me to test that on node js ]]> tag:https:,2017:/www.thisisant.com/forum/viewthreadANT/viewthread/.6899 2017-07-17T08:49:07Z 0 tsakmalisKyriakos
I am trying to connect my Body Scale (SmartLab fit w) with your Android examples (my testing device is Samsung S5 which is compatible with the ANT+). I can retrieve the weight but I cannot do the same when I "Request Advanced Measurement". I mean that I cannot retrieve data about the body fat amount, water,muscle mass, bone mass...

Can you help me about this? Is this problem related to the "Body Scale"?

PS: If you need more details please let me know!

Best Regards,
Tsakmalis Kyriakos ]]> tag:https:,2016:/www.thisisant.com/forum/viewthreadANT/viewthread/.6663 2016-12-22T21:53:52Z 0 SScale20 i'm the developer of the ConnectIQ App BC-1000, a Tanita Weight Scale App.
My app is missing some features which are available on other watches (e.g. FR60).
Can you give me a contact who can provide me with the ANT+ format of the body composition data?
Since this information is owned by Garmin i'm asking here.
It would be a great enhancement for ConnectIQ users.

Regards
Josef

]]> tag:https:,2014:/www.thisisant.com/forum/viewthreadANT/viewthread/.4203 2014-01-02T03:53:48Z 0 PrevaCloud tag:https:,2013:/www.thisisant.com/forum/viewthreadANT/viewthread/.4115 2013-10-02T16:58:42Z 2013-10-07T16:36:22Z LeandroOliveira Any thoughts?

Thanks

Ps: i alter this

#define USER_BAUDRATE (57600) // For AT3/AP2, use 57600
#define USER_RADIOFREQ (57)

#define USER_ANTCHANNEL (0)
#define USER_DEVICENUM (0)
#define USER_DEVICETYPE (119)
#define USER_TRANSTYPE (0)

#define USER_NETWORK_KEY {ANT+ Network Key}
#define USER_NETWORK_NUM (0) // The network key is assigned to this network number

#define MESSAGE_TIMEOUT (1000) ]]> tag:https:,2013:/www.thisisant.com/forum/viewthreadANT/viewthread/.4087 2013-09-09T15:22:46Z 0 aspnetdeveloper2013 I have a Tanita HD-351ANT Scale. It came with a software called "Healthy Edge Lite". I installed the software and initially I had to configure it to connect to the scale and it works fine. When I click the "New Measurement" from the app, the light blinks on the Scale and I can stand on the scale and the weight shows up on the application.

Now I have a requirement to create a web application in ASP.NET to connect to Tanita HD-351ANT Scale and get the measurements. Basically I should to be able to do the same thing that I was doing from the "Healthy Edge Lite" app.
I have downloaded the "ANT Windows Library Package with source code". I am not sure what to configure in the code to communicate with the Scale. Do I need to do something on the "ANT_Libraries" or the "ANT_NET_Libraries"

Any help is greatly appreciated.
Thanks
AD ]]> tag:https:,2013:/www.thisisant.com/forum/viewthreadANT/viewthread/.4031 2013-06-28T10:56:17Z 0 LeandroOliveira
Thanks ]]> tag:https:,2012:/www.thisisant.com/forum/viewthreadANT/viewthread/.3293 2012-06-24T03:40:40Z 2013-08-26T16:43:18Z pierredavidbelanger
The USB parts (init, find, open, claim) are working, I can send and receive ANT messages.

I am following the ANT-UserGuide.pdf and ANT_Weight_Scale_Device_Profile.pdf documentations.

The problem is that the scale is not turning on after I send the user profile, and quickly after the channel close itself.
* fyi: this scale do not have a power button, it power up automagically when a button is pressed on a watch (the light button on a Garmin Forerunner 210) or on the Tanita Display.

There must be something I did wrong?

Please find below a log of an ANT session.
TX:HEX means data is sent to the stick, and RX:HEX means data is read from it.

Thank you!

send reset
TX:A4-01-4A-00-EF
RX:A4-01-6F-20-EA
send key (ANT+ key)
{Edited to remove ANT+ network key}
RX:A4-03-40-00-46-00-A1
send assign channel (channel type = 0(slave), network = 0)
TX:A4-03-42-00-00-00-E5
RX:A4-03-40-00-42-00-A5
send channel id (device number = 0(searching), device type = 199(the documentation said so), transmission type = 0(pairing))
TX:A4-05-51-00-00-00-77-00-87
RX:A4-03-40-00-51-00-B6
send channel timeout
TX:A4-02-44-00-FF-1D
RX:A4-03-40-00-44-00-A3
send channel period (period = 8192 counts(4 Hz))
TX:A4-03-43-00-20-00-C4
RX:A4-03-40-00-43-00-A4
send channel frequency (frequency = 57(2457 MHz))
TX:A4-02-45-00-39-DA
RX:A4-03-40-00-45-00-A2
send open channel
TX:A4-01-4B-00-EE
RX:A4-03-40-00-4B-00-AC
wait for data (page = 1, scale is ready to receive user profile)
RX:A4-09-4E-00-01-FF-FF-02-FF-FF-FE-FF-E1
send profile (page = 58, profile id = 16, display supports profile exchange, 32 yo male, 168 cm, standard and sedentary)
TX:A4-09-50-00-3A-10-00-00-FF-A0-A8-00-20
RX:A4-03-40-00-01-02-E4 (02 = EVENT_RX_FAIL)
RX:A4-03-40-00-01-02-E4 (02 = EVENT_RX_FAIL)
RX:A4-03-40-00-01-07-E1 (07 = EVENT_CHANNEL_CLOSED)

EDIT:

I tried sending data with broadcast(0x4E) and acknowledged(0x4F) too.
I tried with transmission type to 0x05 too.
Sometime, I randomly got a page 80 or a page 81 instead of a page 1.
But every time with the same outcome: RX_FAIL and CHANNEL_CLOSED ]]> tag:https:,2012:/www.thisisant.com/forum/viewthreadANT/viewthread/.3292 2012-06-22T22:17:16Z 0 pierredavidbelanger
The USB parts (init, find, open, claim) are working, I can send and receive ANT messages.

I am following the ANT-UserGuide.pdf and ANT_Weight_Scale_Device_Profile.pdf documentations.

The problem is that the scale is not turning on and the search is timing out.
* fyi: this scale do not have a power button, it power up automagically when a button is pressed on a watch (the light button on a Garmin Forerunner 210) or on the Tanita Display.

There must be something I did wrong? Maybe a step I must do to power up the scale before searching for it?

Please find below a log of an ANT session.
TX means data is sent to the stick, and RX means data is read from it.
I used the square brackets to denote an HEX number.

Thank you!

Send reset
TX:[A4][01][4A][00][EF]
RX:[A4][01][6F][00][CA]
Send key
TX:[A4][09][46][00][00][00][00][00][00][00][00][00][EB]
RX:[A4][03][40][00][46][00][A1]
Send channel assign (channel type = 0(slave), network = 0)
TX:[A4][03][42][00][00][00][E5]
RX:[A4][03][40][00][42][00][A5]
Send channel id (device number = 0(searching), device type = 199(the documentation said so), transmission type = 0(pairing))
TX:[A4][05][51][00][00][00][77][00][87]
RX:[A4][03][40][00][51][00][B6]
Send channel search timeout (0x01 seems to means like 10 seconds)
TX:[A4][02][44][00][01][E3]
RX:[A4][03][40][00][44][00][A3]
Send channel period (period = 8192 counts(4 Hz))
TX:[A4][03][43][00][20][00][C4]
RX:[A4][03][40][00][43][00][A4]
Send channel frequency (frequency = 57(2457 MHz))
TX:[A4][02][45][00][39][DA]
RX:[A4][03][40][00][45][00][A2]
Send channel open
TX:[A4][01][4B][00][EE]
RX:[A4][03][40][00][4B][00][AC]
Send request channel status
TX:[A4][02][4D][00][52][B9]
RX:[A4][02][52][00][02][F6] (02 = searching)
-
- last TX/RX repeated for a short while
-
Send request channel status
TX:[A4][02][4D][00][52][B9]
RX:[A4][02][52][00][02][F6] (02 = searching)
Received event
RX:[A4][03][40][00][01][01][E7] (01 = search timeout)
Received event
RX:[A4][03][40][00][01][07][E1] (07 = channel closed) ]]>