Hi,
I'm trying to get a HRM sensor and SCM sensor work together simultaneously. But until now the only thing I get is an a few times heart-rate after each other and then a few times cadence /speed. But it never appears simultaneously. Does anybody of you have a clue?
This is the initialization sequence:
Set network key
Set channel heart-rate
Set channel ID heart-rate
Set channel period heart-rate
Set channel RF heart-rate
Set channel cadence
Set channel ID cadence
Set channel period cadence
Set channel RF cadence
Set channel open cadence
Set channel open heart-rate
These are the values:
Heart-rate channel number: 0x02
Heart-rate channel type: 0x00
Heart-rate device type: 0x78
Heart-rate RF frequency: 0x39
Heart-rate search time: 0x0c
Heart-rate message period: 16140
Cadence transmission type: 0x01
Cadence channel number: 0x01
Cadence channel type: 0x00
Cadence device type: 0x79
Cadence RF frequency: 0x39
Cadence search time: 0x0c
Cadence message period: 8086
Cadence transmission type: 0x00
Thanks for your help,
DevelopmentNspyre
