ANT Forum

I'm just getting started, and would like to view and understand the data provided by a Polar H10 HR monitor as a way of better understanding ANT+.

What software can I use to do that with an ANT+ stick on a PC?

I thought SimulANT+ would do it, since the software page says it can be used for "Receiving from ANT+ devices".

However, while I can see the USB stick, I can't see any way to read read data from the real HR sensor.

Thanks,
Dirk      

In case anyone else is trying to figure this out:

SimulANT is the easiest way to do this. It doesn't just simulate sensors, it can also simulate a sensor _display_, which is what I needed.

With a heart rate monitor, I added a simulator and chose "Heart Rate Display".

Then, after pressing "Turn On", you should see the display connecting to the heart rate monitor. This doesn't always happen reliably, so try multiple times until it works.

Make sure your sensor is actually on (for example, heart rate monitors have to be on your body to transmit).      

dirkbeer - 31 May 2023 10:12 AM

In case anyone else is trying to figure this out:

SimulANT is the easiest way to do this. It doesn't just simulate sensors, it can also simulate a sensor _display_, which is what I needed.

With a heart rate monitor, I added a simulator and chose "Heart Rate Display".

Then, after pressing "Turn On", you should see the display connecting to the heart rate monitor. This doesn't always happen reliably, so try multiple times until it works.fnaf games

Make sure your sensor is actually on (for example, heart rate monitors have to be on your body to transmit).

Thanks for guide      

dirkbeer - 31 May 2023 10:12 AM

In case anyone else is trying to figure this out:

SimulANT is the easiest way to do this. It doesn't just simulate sensors, it can also simulate a sensor _display_, which is what I needed.

With a heart rate monitor, I added a simulator and chose "Heart Rate Display".

Then, after pressing "Turn On", you should see the display connecting to the heart rate monitor. This doesn't always happen reliably, so try multiple times until it works.

Make sure your sensor is actually on (for example, heart rate monitors have to be on your body to transmit).

Thanks, I will try it.      

dirkbeer - 31 May 2023 10:12 AM

In case anyone else is trying to figure this out:

SimulANT is the easiest way to do this. It doesn't just simulate sensors, it can also simulate a sensor _display_, which is what I needed.

With a heart rate monitor, I added a simulator and chose "Heart Rate Display".

Then, after pressing "Turn On", you should see the display connecting to the heart rate monitor. This doesn't always happen reliably, so try multiple times until it works. bloxd io

Make sure your sensor is actually on (for example, heart rate monitors have to be on your body to transmit).

It worked. I could connect to the heart rate monitor. Many thanks.      

dirkbeer - 31 May 2023 10:12 AM

In case anyone else is trying to figure this out:

SimulANT is the easiest way to do this. It doesn't just simulate sensors, it can also simulate a sensor _display_, which is what I needed.

With a heart rate monitor, I added a simulator and chose "Heart Rate Display".

Then, after pressing "Turn On", you should see the display connecting to the heart rate monitor. This doesn't always happen reliably, so try multiple times until it works.

Make sure your sensor is actually on (for example, heart rate monitors have to be on your body to transmit).

Thanks bud, you made my day      

dirkbeer - 17 May 2023 10:35 AM

I'm just getting started, and would like to view and understand the data provided by a Polar H10 HR monitor as a way of better understanding ANT+.

What software can I use to do that with an ANT+ stick on a PC?

I thought SimulANT+ would do it, since the software page says it can be used for "Receiving from ANT+ devices".

However, while I can see the USB stick, I can't see any way to read read data from the real HR sensor.

Thanks,
Dirk

mini crossword
With the help of the open source program ANT+ to OSC Bridge, you may link ANT+ devices and transform data into OSC protocol. Linux, macOS, and Windows are among the operating systems on which ANT+ to OSC Bridge is compatible. The ANT+ Plugin allows you to receive and analyze ANT+ data if you're using Cycling '74's Max MSP. This plugin offers features for receiving data from ANT+ devices and transforming it into a format that is compatible with Max MSP.      

dirkbeer - 17 May 2023 10:35 AM

I'm just getting started, and would like to view and understand the data provided by a Polar H10 HR monitor as a way of better understanding ANT+.

What software can I use to do that with an ANT+ stick on a PC?

I thought SimulANT+ would do it, since the software page says it can be used for "Receiving from ANT+ devices".

However, while I can see the USB stick, I can't see any way to read read data from the real HR sensor.



It was helpful; thank you for sharing the guide. I did everything, but when the problem was still not solved, I took the help of my friend, and he suggested I update my PC and Windows as well. I am also facing some financial problems, but I found an idea to make it happen more easily. I love casinos; I play them offline, but I have found a website where they have a complete list of online casinos in https://casinosanalyzer.com/online-casinos/slovenia-svn Slovenia. The list was good; I only had to choose the best from the best. And when I selected a casino platform, after my signup, I also got a signup bonus. They made it so easy for me, and now I know I am going to upgrade my PC in a short time. I also wasn't suggesting it to others because this service provides us with a list and makes it so easy to enter the casino world. If you are a beginner or a professional, you can use them to find the best platform in your location.

Thanks,
Dirk

It was helpful, thank you for sharing the guide.