Welcome Guest,Register Now
Log In

ANT Forum

Welcome guest, please Login or Register

   

Datasheet for ANTBAT3 Board

Rank

Total Posts: 21

Joined 2016-12-26

PM

I can't seem to find a datasheet for the ANTBAT3 board that comes with the extender kit, does one exist?      
Avatar
RankRankRankRank

Total Posts: 745

Joined 2012-09-14

PM

It doesn't exist in its own document, but there is a copy of the schematic near the end of the ANT BLAZE Starter Guide.      
Rank

Total Posts: 21

Joined 2016-12-26

PM

Any chance there is a pin mapping that has the pins labeled for usage with the network processor? (i.e. signals like PORTSEL labeled)      
Avatar
RankRankRankRank

Total Posts: 745

Joined 2012-09-14

PM

You'll have to compare the Molex connector mapping to the D52 Module Datasheet, the M6 layout compares directly with the Molex connector pins, particularly Appendix A on Page 35 of the datasheet.

So for instance Molex connector pin 17 would be used as nSUSPEND in UART mode, which maps to BUTTONA or Breakout Pin 2 on the AA battery board.