ANT Forum

hello !

We are currently working with BKOOL Smart Pro 2 hardware (http://www.bkool.com/en) and a Unity application for Android. We have a problem with refreshing the data received by the BKOOL ANT+ module. We only receive one data per second, which is not enough for the use we want to make of it. We need more data.

Do you have any ideas or solutions to this problem? or more information needed ?

Thank you in advance for your returns!

Translated with http://www.DeepL.com/Translator      

I don't know which specific message you are using, but according to the specification, the messages have a minimum rate of 0.8Hz. Unfortunately, BKool trainers do not send power data on a power meter profile, so I don't know how far you can come with this.

Relevent piece from the specification:

7.6 Pages 19-26: FE Specific Main Data Pages


Data pages 19 to 26 contain data that is specific to the type of FE. Only pages relevant to the FE type should be sent by any one type of FE, and none are required pages for transmission under the ANT+ FE profile. If an FE specific data page is transmitted by the FE, it shall be sent at a minimum rate of 0.8Hz (i.e. once every five messages).