ANT Forum

Has anybody already implemented the fit2 module in the standalone mode (datasheet p 7) ?
For my part, impossible to run him. The signal " HR_PULSE " does not change !
Please, help me.      

Hi,
Has anybody already implemented the fit2 module in the standalone mode (datasheet p 7) ?
For my part, impossible to run him. The signal " HR_PULSE " does not change !
Please, help me.

Regards
Laurent      

Hi Laurent,

Please take a look at the Fitness Modules App Note, section 10.

This should explain how to get everything working.

Kat      

Hi Kat,

When the module is ok, you know what is the pin HR_PULSE level . High or low ?

The datasheet "Fitness FIT2 Module" p10 indicate a level high !

All the signals are good except for me, the signal " HR_PULSE " is low.

Have you other advice for my searches ?

Regards
Laurent      

Hello,

Has anybody already used the module fit2 in standalone mode ?

Nevertheless my tests, impossible for me !

I tested several modules but it is the same result !

Any help is welcome...

Regards